L228 for sale at Leslie G. Fogg, Inc.. Serving your new and used equipment needs from Bridgeton, and Upper Pittsgrove, NJ.

CroppedImage660350-NH-L228-2015.jpg

L228

Skid Steer Loaders

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Sorry, currently there are no features but check back with us later.

Engine


Manufacturer/model FPT /F5H FL463A*F001
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 110)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @ 1400 rpm

 

Power Train


Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional), mph (km/h) 10.5 (16.9)

 

Dimensions


Height to
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised, in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 54.7
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 33.8
Rollback, bucket at full height, degrees 84.8
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan), in (mm) 8 (203)
Angle of departure, degrees 23.5
Clearance circle without bucket, in (mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)

 

Hydraulic System


Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)

 

Performance Specs


Rated operating load, 50% tip, lbs (kg) 2800 (1270)
Tipping load, lbs (kg) 5600 (2540)
Breakout force, lift cylinder, lbs (kN) 6030 (27.3)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 8245 (3740)
Contact Us

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!

Contact Us Close this form

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!