New Holland AG H6740 Mounted

H6740 Mounted for sale at Leslie G. Fogg, Inc.. Serving your new and used equipment needs from Bridgeton, and Upper Pittsgrove, NJ.


H6740 Mounted

Heavy-Duty Disc Mowers

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

New Holland H6000 Series heavy-duty disc mowers breeze through the toughest conditions to give you a clean, even cut in less time. Discs spin up to 3,000 rpm, producing a knife tip speed of up to 187 mph to slice through dense, wet grasses, fire ant hills and gopher mounds. Select from four heavy-duty models, including a pull-type model with a cut width of over 10 feet.

The 3-Year MowMax™ Protection includes the one year standard machine warranty plus two more years of coverage on the MowMax™ disc cutterbar starting with the input drive shaft. Coverage pays for parts and labor for defective parts or workmanship within the 36 month time period.

H6740 Mounted
Cutter Bar
Cutting width ft. in. (mm) 7' 10" (2388)
Cutting height in. (mm) 0.95-3.25 (24-82.5)
Cutter bar tilt angle degrees 0 to -10
Cutter bar operating range degrees +18 to -32
Breakaway angle degrees 19
Cutter bar floatation Vertical adjustable spring
Type cutterbar MowMax™ cutterbar, modular, w/individual sealed reservoirs
Number of discs 6
Knives per disc 2
Disc cutting diameter in. (mm) 19.7 (500)
Disc drive Bevel gears in sealed modules
Disc speed RPM 3,000
Cutter bar gear protection Std. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard** in. (mm) 94 (2388)
Swath width with optional swathboards** in. (m) 62 (1575) includes LH & RH swathboards
Minimum PTO horsepower required hp (kW) 55 (40.9)
Input speed RPM 540
PTO shaft spline/size required 6-spline/ 1-3/8"
Driveline protection Belt drive to cutter bar
Overrunning clutch Standard
Belt tension Spring-loaded tensioner with adjustment gauge
Hydraulics and Hitch
Hydraulic circuits required One remote
Minimum relief pressure required psi (bar) 1,500 (104)
Hitch Category I or II
Dimensions and Weight
Overall width in. (mm) 160.25 (4070)
Overall length in. (mm) 50.5 (1283)
Height - transport position* in. (mm) 119.5 (3035)
Weight, shipping lb. (kg) 1,610 (730)
Weight, operating lb. (kg) 1,460 (662)
Maximum transport speed NA
Tires/wheels NA
Contact Us


Let Leslie G. Fogg help you get moving today!

Contact Us Close this form


Let Leslie G. Fogg help you get moving today!