New Holland AG H7150 Trail Frame and HS14 Haybine® Head

H7150 Trail Frame and HS14 Haybine® Head for sale at Leslie G. Fogg, Inc.. Serving your new and used equipment needs from Bridgeton, and Upper Pittsgrove, NJ.

CroppedImage660350-NH-H7150TrailFrame-HS14-Head.jpg

H7150 Trail Frame and HS14 Haybine® Head

Haybine Mower-Conditioner

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

THE INDUSTRIES FIRST AND STILL THE BEST
Since 1964 when New Holland introduced the first combined sickle mower and conditioner, the Haybine® name has been synonymous with time-saving, impeccable cutting performance, fast drying, and time-tested reliability. New Holland continues this legacy with Haybine model 472 and 488 side-pull mower-conditioners and H7150 center-pivot, trail frame for HS Series 14-, 16-, and 18-foot mower-conditioner heads.

472 and 488 MODEL HAYBINE® MOWER-CONDITIONERS
These side-pull models offer traditional producers just right capacity with a low power requirement and base models require no hydraulic connections ideally suited for classic tractors, many of today's compact models, as well as small utility tractor models.

H7150 HAYBINE® MOWER-CONDITIONER TRAIL FRAME FOR HS SERIES HEADS
If you’re looking for consistent, high cutting quality combined with high capacity, look no further than the H7150 Haybine mower-conditioner trail frame paired with an HS Series sickle mower-conditioner head, available in cutting widths of 14, 16, or 18 feet. The center-pivot design combined with dual, counter-stroking sickles and wide cutting widths makes short work of large acreages.

H7150 Trail Frame and HS14 Haybine® Head
Auger
Auger Single, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting
Floating range, in. (mm) 2 (50.8)
Speed, rpm 287
Conditioner
Conditioner Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm) 102 (2591)
Roll diameter, in. (mm) 10.375 (263.5)
Drives    Spur drive gearbox and PTOs
Speed, rpm  717
Pressure, lbs./in. (N/mm) 2 to 38 (0.3 to 6.6)
Roll gap adjustment Wrench
Material discharge, in. (mm) Adjustable gate for swath, windrow or intermediate widths
   38 and 96 (965 and 2438)
Cutterbar
Cutterbar Two opposing assemblies, timed, dual, counter-stroking sickles
Knives Bolted, over-serrated sections, adjustable hold-dohold-downs
Guards Twin, forged steel, double-hardened
Cutting height, in. (mm) 1.2 to 6.2 (30 to 157)
Cutting angle, degrees -6 to -12
Hydraulic tilt Standard
Guard points max lift, in. (mm) 25 (635)
Skid shoes 4
Sickle drive Open, dual wobble
Sickle speed, spm 1810
Sickle stroke, in. (mm) 3 (76)
Cutting Width
Cutting Width, ft. in. (mm) 14' 3" (4343)
Dimensions
Overall width, operating, ft. in. (mm) 16'3" (4953)
Overall width, transport, ft. in. (mm) 16’ 3” (4953)
Overall length, transport, ft. in. (mm) 25’ 11” (7900)
Overall height, operating, ft. in. (mm) 6’ 1” (1850)
Overall height, raised, ft. in. (mm) 6’ 8” (2030)
Drive
Drive 540 rpm PTO
Hydraulic Cylinders
Hydraulic Cylinders Standard header lift, Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req Tongue-mounted, swiveling pump
  70 hp (52kw)
Operating Speed
Operating Speed, mph (kph) up to 8 (13)
Max safe transport speed, mph (kph) 20 (32)
Reel
Reel 5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, mph (kph) 6.5 to 10.9 (10.46 to 17.54)
Speed Adjustment Variable sheave
Diameter (maximum), ft. in. (mm) 3’ 6” (1067)
Adjustments Fore/aft, vertical, pitch
Drive  Belt and chain
Bushings/bearings, in. (mm) 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires 31 x 13.50-15, 8PR flotation
Tractor Hookup
Tractor Hookup Tongue-mounted, swiveling pump
Weight
Weight, lbs. (kg) 6825 (3096)
Contact Us

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!

Contact Us Close this form

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!