488 for sale at Leslie G. Fogg, Inc.. Serving your new and used equipment needs from Bridgeton, and Upper Pittsgrove, NJ.

CroppedImage660350-NH-Haybine-488-2017.jpg

488

Haybine Mower-Conditioner

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

THE INDUSTRIES FIRST AND STILL THE BEST
Since 1964 when New Holland introduced the first combined sickle mower and conditioner, the Haybine® name has been synonymous with time-saving, impeccable cutting performance, fast drying, and time-tested reliability. New Holland continues this legacy with Haybine model 472 and 488 side-pull mower-conditioners and H7150 center-pivot, trail frame for HS Series 14-, 16-, and 18-foot mower-conditioner heads.

472 and 488 MODEL HAYBINE® MOWER-CONDITIONERS
These side-pull models offer traditional producers just right capacity with a low power requirement and base models require no hydraulic connections ideally suited for classic tractors, many of today's compact models, as well as small utility tractor models.

H7150 HAYBINE® MOWER-CONDITIONER TRAIL FRAME FOR HS SERIES HEADS
If you’re looking for consistent, high cutting quality combined with high capacity, look no further than the H7150 Haybine mower-conditioner trail frame paired with an HS Series sickle mower-conditioner head, available in cutting widths of 14, 16, or 18 feet. The center-pivot design combined with dual, counter-stroking sickles and wide cutting widths makes short work of large acreages.

Haybine® 488
Auger
Auger NA
Floating range, in. (mm) NA
Speed, rpm NA
Conditioner
Conditioner Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm) 102 (2591)
Roll diameter, in. (mm) 10-3/8 (264)
Drives    Individual, #50 roller chain
Speed, rpm  637
Pressure, lbs./in. (N/mm) 2 to 38 (0.3 to 6.6)
Roll gap adjustment Shims
Material discharge, in. (mm) Adjustable gate for swath, windrow or intermediate widths
   38 and 96 (965 and 2438)
Cutterbar
Cutterbar One assembly
Knives Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles
Guards Twin, forged steel, double-hardened hold-downs
Cutting height, in. (mm) 1.25 to 4.25 (32 to 108)
Cutting angle, degrees -7 or -10
Hydraulic tilt NA
Guard points max lift, in. (mm) 19 (483)
Skid shoes 2
Sickle drive wobble joint
Sickle speed, spm 1632
Sickle stroke, in. (mm) 3 (76)
Cutting Width
Cutting Width, ft. in. (mm) 9'3" (2819)
Dimensions
Overall width, operating, ft. in. (mm) 13'8-1/4" (4172)
Overall width, transport, ft. in. (mm) 12'2" (3708)
Overall length, transport, ft. in. (mm) 13'4" (4064)
Overall height, operating, ft. in. (mm) 3'6" (1067)
Overall height, raised, ft. in. (mm) 5'7" (1702)
Drive
Drive 540 rpm PTO
Hydraulic Cylinders
Hydraulic Cylinders Optional header lift, Rope control
Minimum Tractor Req
Minimum Tractor Req 35-hp (26.1 kw)
  One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)
Operating Speed
Operating Speed, mph (kph) up to 8 (13)
Max safe transport speed, mph (kph) 25 (40)
Reel
Reel 4-tine bar
Peripheral speed, mph (kph) 6.5 to 8.6 (10.5 to 13.8)
Speed Adjustment Variable sheave
Diameter (maximum), ft. in. (mm) 3'6-1/4" (1073)
Adjustments Fore/aft, vertical, pitch
Drive  Belt and chain
Bushings/bearings, in. (mm) 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires 27 x 9.50-15 flotation
Tractor Hookup
Tractor Hookup Equal-angle PTO
Weight
Weight, lbs. (kg) 2763 (1253)
Contact Us

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!

Contact Us Close this form

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!