New Holland AG Discbine® 313 (roll)

Discbine® 313 (roll) for sale at Leslie G. Fogg, Inc.. Serving your new and used equipment needs from Bridgeton, and Upper Pittsgrove, NJ.

CroppedImage660350-NH-Discbine313roll-2015.jpg

Discbine® 313 (roll)

Discbine Disc Mower-Conditioners

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

THE DEFINITION OF DISC MOWER-CONDITIONERS
Even in tough conditions, a genuine Discbine disc mower-conditioner swiftly turns heavy crop into fast-drying windrows or swaths. An extensive model lineup provides you with numerous reliable choices. From the economical seven-disc models with a modest, nine-foot cut up to the highly productive 10-disc models that quickly knock down sixteen-foot with every pass, there’s a model that’s suitable for your acreage and operation.

A CUT ABOVE THE REST: MOWMAX™ AND MOWMAX™ II CUTTERBARS
H7000 Series models cutting up to 10’ 4” inches feature the proven reliability and performance of the classic MowMax disc cutterbar. For the greatest capacity, Discbine® Series 313 and 316 center-pivot models feature the MowMax II disc cutterbar, a cutterbar designed for the higher demands of large harvesting operations. It incorporates the large discs and heavy-duty components also found on Durabine™ disc heads for New Holland Speedrower® self-propelled windrowers.

CONDITIONING SYSTEMS FOR FAST DRYING
You’ll harvest crops quickly and produce nutritious, high-value feed with your choice of three conditioning systems. Choose the gentle conditioning of rubber chevron-intermeshing rolls that save delicate leaves, steel chevron rolls for winter forage or long-stem and cane grasses, or LeaningEdge™ flails for fast drying of grass hay.

FAST AND SIMPLE IN-FIELD SERVICABILITY
MowMax and MowMax II cutterbars feature a true modular design for smooth, quiet, trouble-free mowing as well as fast and inexpensive servicing. Driven through individually sealed gearboxes with dedicated oil reservoirs, modules are never at risk for oil starvation while cutting on hillsides. In the event that your mower hits an obstruction, the exclusive New Holland ShockPRO™ hubs absorb harmful impacts, protecting the cutterbar drive from damage. Even better, they’re quick to replace in the field so you can keep cutting when the weather is right. Accidents happen and in the event of a significant collision, the true modular MowMax concept fully contains damage to the effected module to minimize damage to the rest of the cutterbar. How? Break a knife? MowMax II cutterbars now feature optional QuickMax™ knives that provide you with the ability to change out knives in a matter of seconds.

3-YEAR MOWMAX™ PROTECTION
You not only get the best disc cutting performance in the business with every Discbine disc mower-conditioner, you get the peace of mind of 36 months of internal Cutterbar protection. Three full years of coverage on both the MowMax and MowMax II cutterbars includes the base one-year warranty on the full machine plus two years of additional protection on the cutterbar drive line components. It’s another New Holland exclusive.

Discbine® 313 (roll)
New Holland-Disc Cutterbar
Type MowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m) 13' 0" (4)
Number of discs 8
Number of knives 16 (2 per disc)
Disc Speed, rpm 2,250
Cutting angle 2 to 10 degrees
Hydraulic Cutting angle control Standard
Standard Cutting height skid shoe, in. (mm) Standard 0.79-2.07 (20-69
Fixed Raised, high-stubble skid shoe Optional 79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe Optional 3-5.5 (76 - 140)
BioMass skid shoe Optional 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm) 16.2" (411)
Cutterbar Flotation Vertical and lateral, adjustable springs
QuickMax™ Knife Change System Optional
ShockPro™ Disc Drive Hub protection system Standard
MowMax™ 3-year cutterbar protection plan Standard
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner Optional
Type. Choice of molded rubber or steel rolls
Roll Length, in. (mm) 125 (3175)
Roll Diameter, in. (mm) 10.4 (264)
Roll Drive 4 HB V-belt and enclosed gears
Roll Speed, rpm Two-Speed: 750 or 640
Roll Pressure System Torsion Bar
Conditioner Intensity Adjustment Single crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner Optional
Number of LeaningEdge flails 120
Semi-Swinging LeaningEdge flail design Standard
Rotor Diameter, in. (mm) 22 (560)
Standard Speed, rpm 1042
Optional Slow Speed, rpm 752
Drive. 4 HB V-belt
Conditioner Intensity Adjustment. Single crank adjustable rotor hood
Optional Textured Hood Liner Kit Optional
Attachment
Standard Drawbar -
Drawbar Swivel Hitch Optional
2-pt Swivel Hitch Optional
Dimensions
Height, Transport, ft. in. (m) 7' 5" (2.26)
Height, Operating, ft. in. (m) 6' 7" (2.01)
Width, Transport, ft. in. (m) 13' 4" (4.04)
Width, Operating, Std. Drawbar Hitch, ft. in. (m) -
Width, Operating 2-pt Swivel Hitch, ft. in. (m) 21' 3" (6.5)
Width, Operating Drawbar Swivel Hitch, ft. in. (m) 19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m) -
Length, Transport, 2-pt Swivel Hitch, ft. in. (m) 27' 5'' (8.4)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m) 26' 5" (8.1)
Length, Operating, Standard Drawbar Hitch, ft. in. (m) -
Length, Operating, 2-pt Swivel Hitch, ft. in. (m) 23' 0'' (7.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m) 22' 0'' (6.7)
Weight, Operating lbs. (kg) 6,275 (2846)
Drive
Drive 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive Protection Slip clutch and over-running clutch
Hydraulics
Hydraulic swing Standard (double-acting cylinder)
Operating Position Center-Pivot, Right or Left Side
Hydraulic lift Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt Optional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm) 10 (3000)
Windrow, ft. (mm) Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage) -
Speeds
Operating, mph (kph) 0 to 9 (0 to 14.5)
Transport, mph (kph) 20 (32)
Tractor Requirement
Tractor Requirement 90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.
Hydraulic valves All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size 12.5L x 15 8PR
Contact Us

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!

Contact Us Close this form

GOT A QUESTION?

Let Leslie G. Fogg help you get moving today!